How can i fix labtec mouse the right click wont work? - labtec mouse
With both hands, place, but his hands firmly on the mouse, it really added momentum and shake as hard as possible. The son of AB * tch n Chuck away.
Sunday, December 20, 2009
Labtec Mouse How Can I Fix Labtec Mouse The Right Click Wont Work?
2 comments:
Got $ 5 if they purchase a new mouse ... Is likely that broken plastic or modify what I say is not worth fixing .....
Well, that depends on their ability to repair it, it is possible to repair the microphone inside a mouse or joystick, but it takes a certain delicacy, if you open your mouse, you can see that at least 2 microphones, if possible, the microphone from the circuit board with a separate soldering gun (welding experience is required in this to avoid burning the PCB or the plastic that surrounds the bus, and know, finally, how to put together again) if you do not know as then attempt a nonobstructive switches you can use your tools to win it openly.
See In most switch and get a hook closure on each side of the switch, you must dig with small tools and lift one side at the top of the switch is open, it's the same side switch and open the lid to be careful, because many small parts that can bounce out of the switch after opening with the help of an electronic fat are cleaning spray (especially for cleaning resistors, etc.) used and spray the contacts between the two Collitogether, if you change the key. Having considered the points of contact and be sure to close any residues or oxidation of May before the button again when corrosion or oxidation is still present, you can rip using sandpaper in 2000 and slowly but firmly, rub the points that are clean, close the microphone, then install and test
If the reason is the change, then it's work now should, but can also be something completely different.
Hope this helps
Post a Comment